NEO Series - Mechanical Self-cleaning Filter

Use metal screen as filtration element.
Blades rotate and scrape contaminants off to clean the element under PLC control
PLC controls drain valve open to purge contaminants out
Above 98% of contaminants clogging on the surface of element could be removed by the knife blades.

Micron Rating:30-3000μm

Maximum Operating Pressure:1.0MPa/1.6MPa

Flow Rate Range：4~283 m³/h

Maximum Operating Temperature: 200℃

Housing Material: SUS316L/SUS304/CS

Element Material:SUS316L/SUS304

Sealing Material:NBR/VITON/Silicone/PTFE/EPDM

Features & Benefits

Features	Benefits
Self cleaning rotating blades remove contaminants	Applicable for a large range of viscosity fluids
Element cleaning without stopping or disrupting the fluid flow	Reduce downtime
Fully enclosed system	- No operator contact with hazardous fluid or odour - No externally introduced contamination problem - Clean operating area
Low pressure loss	Low energy consumption in the system
No disposable filter bag or cartridge needed	Reduced disposable cost, labour cost, and landfill waste