FX Series Backwash Self-cleaning Filter
Best Option for High Flow
- High flow rate design
- Use metal screen as filtration element
- PLC control drain valve to open, which cause fluid in the filter to flow backward and wash the contaminants out of the filter.
- Especially suitable for water or water-like fluid.
Standard Specification:
Micron Rating:50-1500μm
Maximum Operating Pressure:1.0MPa/1.6MPa
Flow Rate Range：5 ~7000m3/h
Maximum Operating Temperature: 120℃
Housing Material: SUS316L/SUS304
Element Material:SUS316L/SUS304
Sealing Material：NBR/VITON/Silicone/PTFE/EPDM
FX Series - Features & Benefits
| Features | Benefits |
|---|---|
| Element cleaning without stopping or disrupting the fluid flow | Reduce downtime dramatically |
| Large filtration area with compact design | - Single filter permits flow rate of up to 8500m3/h - save space occupation |
| Very low flow velocity on the surface of the element | Contaminants on the surface slowly form a "cake" which is capable of removing smaller particles. This "cake" enlarges the dirty holding ability of the element, therefore it lengthens the interval of backwash and reduces consumption of backwash fluid |
| Fully enclosed system | - No operator contact with hazardous fluid or odour - No externally introduced contamination problem - Clean operating area |
| No disposable filter bag or cartridge | Reduce disposable cost, labour cost, and landfill waste |
| Highly integrated | Fewer valves, connectors and seals, lower maintenance costs |
| Low pressure loss | Lower energy consumption in the system |